NSW Agents For The Dustless Blasting System

The Dustless Blasting System heralds the evolution of decades of past laborious practices and now yields the greatest versatility the blasting industry has seen in over 60 years.

As the NSW agents, we at LR Technologies are proud to offer a blasting system that may be used with not just a multiple of media but is also cost effective and safe.

The Dustless Blasting System was developed in the USA, in principle to decrease the time, in turn becoming more cost effective and safe due to the negation of air borne pollutants.

The use of crushed recycled glass, mixed with water so as to achieve industry leading surface remediation results was the crux of those who had the brain storm.

The inclusion of Hold Tight 102 to the system examplifies the brain storming, Hold Tight 102, will prevent flash rusting for up to 72 hours when used with in the blasting of metal.

Frequently Asked Questions

Q) What is the Dustless Blaster System ?

A) The Dustless Blaster works by mixing water and an abrasive inside the blast tank. By introducing water, the system dramatically increases both the mass and energy that the machine unleashes. If you imagine throwing a hand full of wet sand at a brick wall full of graffiti, then throw a hand full of dry sand at the same wall of graffiti ! Not only will the wet sand hit the wall harder, it will also not become a cloud of dust that the dry sand will ! The principle is that simple.

Q) How can the Dustless Blaster System save me time and money ?

A)
* Faster Example: The Dustless Blaster System can strip a car in under 2 hours.
* Minimal Dust The abrasive is trapped in water, inturn grounded, eliminating the plume of dust from traditional systems.
* Lower Abrasive Consumption The Dustless Blaster System uses less media to do more work.
* Abrasive Flexibility The Dustless Blaster System uses less media to do more work.
* No Warping The inclusion of water prevents friction and will not warp thin metal like sand blasting will.
* Safe For Workers Recycled bottle glass contains NO free silica, which is the leading cause of silicosis.
* Less containment needed In most cases, expensive and time consuming containment requirements are negated.
* No Affect To Nearby Workers Whilst appropriate OH&S systems should always be in place, the Dustless Blasting System normally negates the impediment of associated work areas.
* Leaves A Paint Ready Surface If metal, the inclusion of Hold Tight 102 prevents flash rusting for up to 72 hours.

Q) What kind of abrasive does the Dustless Blaster System use ?

A) The Dustless Blaster System can use just about any abrasive that sinks in water that does not dissolve. The designed blasting media is recycled bottle glass as it is clean, price competitive, versatile and eco-friendly. We suggest that the use of alternative blast media is first discussed with your representative so as to determine it’s consistancy and particle size.

Q) What size compressor do I need to run the Dustless Blaster System ?

A) We recommend a 185 CFMs for all of our blasters. Using a lower CFM is possible, but to maintain optimum system efficiencies a minimum of 185 CFMs is suggested.

Q) If water is used in the process, won’t it rust metal ?

A) When blasting metal with the Dustless Blaster System the inclusion of Hold Tight 102 is included to prevent flash rusting for up to 72 hours. This extremely effective rust inhibitor, Hold Tight 102, also assists with negating the corrosion of the blasting tank.

Q) What happens to the abrasive after blasting ?

A) The abrasive is dampened to settle on the ground beneath or very near to whatever your blasting, it may be reclaimed by simply brooming or vacuuming.

Q) Can the Dustless Blasting System cause warping like sandblasting can ?

A) Dry abrasive blasting generates heat, inturn warping of metal. The Dustless Blasting System, through the introduction of water negates the increase of heat during the blasting process.

We 100% fully guarantee all our work will be carried out to the highest industry standards

Steve Bain
CEO
LR Technologies